<\/strong><\/h3>\n\n\n\nChemical deburring is a process using chemical energy. Chemical ions will adhere to the surface of parts, forming a film with high resistance and low conductivity to protect the workpiece from corrosion. Because the burr is above the surface, it can be removed by chemical action. This deburring method is widely used in the fields of pneumatic, hydraulic and construction machinery.<\/strong><\/strong><\/p>\n\n\n\nDeburring at High Temperature<\/strong><\/strong><\/h3>\n\n\n\nFirstly, the parts that need deburring will be put into the tightly sealed chamber, and then the whole part will be fed into the hydrogen-oxygen mixture with a certain pressure. Ignition will explode the mixture gas, release heat, and burn the burrs of the parts without harming the parts.<\/strong><\/strong><\/p>\n\n\n\nBurr removal by rolling<\/strong><\/strong><\/h3>\n\n\n\nThe parts and abrasives are put into the closed drum together. During the rotating process of the drum, the dynamic torque sensor, parts and abrasives are grinded together to remove burrs. Abrasives can be made of quartz sand, sawdust, alumina, ceramics, metal rings, etc.<\/strong><\/strong><\/p>\n\n\n\nHand deburring<\/strong><\/strong><\/h3>\n\n\n\n