Tungsten Carbide Drawing Dies

Tungsten carbide drawing dies, also called as cemented carbide drawing pellets are widely used in drawing metal and non-metal industry. They can be used in drawing steel wires, steel bars, and tubes, etc. And air condition tubes are drawn by carbide floating plug which is a very special drawing tool.

Tungsten carbide drawing die is produced by powder metallurgy with components of tungsten carbide and cobalt. Because of the high wear resistance, excellent polishing, small adhesion, and small friction, our carbide drawing dies can provide a long lifetime.

Meetyou Carbide dies can be relied upon to draw the shape you want within the tolerance required. Special coatings like titanium nitride/titanium carbide or vanadium carbide are available on request to further enhance die life.

소결
잘 알고 있기.

고급 컴퓨터 제어 HIP 퍼니스는 더 조밀 한 구조를 얻기 위해 소결 공정 동안 더 많은 압력을 제공하기 위해 적용됩니다.

가루
우수한.

우리는 신중하게 원료 분말의 우수한 품질을 선택하고 통제합니다. 분말 분무 건조 기술은 입자 분포의 균일 성을 보장합니다.

가공
집에서.

우리는 센터리스 연삭, CNC 원통형 연삭, CNC 내부 연삭, 와이어 EDM 및 레이저 에칭 등을 포함하여 현장에서 다양한 가공 서비스를 제공합니다.

Types of carbide drawings die

Carbide Wire Drawing Dies

The wire drawing process involves drawing a wire of a larger diameter through a die with a smaller diameter bore. This reduces the diameter of the wire to produce the desired size and tolerance of the wire, while the volume remains the same.

copper wire drawing
bronze-bar

Carbide Bar Drawing Die

Drawing bars and rods is similar to drawing wires, only they tend to be much thicker. A wide variety of metals are used for this purpose, including many steel and copper alloys.

Carbide Tube Drawing Dies

The process is similar to the wire drawing process. However, a mandrel is used to form the inner dimensions of the tubing. The mandrel is placed at the throat of the die and used to determine the wall thickness and inner diameter. A properly formed mandrel will provide for a smooth surface on the inside of the tube or pipe.

bronze-tubes
carbide-shaped-drawing-die

Shaped Carbide Drawing Dies

No matter which kind of shape, we can provide customized solutions for you. Here are some typical shaped carbide drawing dies:

  • Round Drawing Dies
  • Hexagon Drawing Dies
  • Square Drawing Dies
  • Rectangle Drawing Dies
  • Custom Shapes

OEM 맞춤 서비스

우리는 귀하의 요구 사항에 따라 등급을 개발하고 도면과 동일한 모양을 만들 수 있습니다. 레이저 마킹 및 중립 패키지도 이용할 수 있습니다.

학년

등급 차트
등급
   Density(g/cm²)
TSR(MPa)
Hardness(HRA)
Grain Size(um)
YG3X15.1≥1700≥920.8
YG614.9≥2150≥902
YG6X14.9≥2300≥91.50.8
YG814.8≥2800≥89.82
YG1514≥3000≥87.52
신청

• Steel wire
• Stainless steel wire
• Copper wire
• Aluminum wire
• Tungsten wire
• Various other ferrous and non-ferrous metal wire types

 

YG3XExcellent wear resistance,suitable for drawing steel,nonferrous metal and alloy wires less than Φ2mm under low stress,especially having better effect for drawing fine wires less than Φ0.6mm.
YG6Good wear resistance, suitable for drawing steel wires, nonferrous metal wires and alloy wires or bars less than Φ20mm under low stress, also for drawing tubes less than Φ10mm.
YG6XGood wear resistance, suitable for drawing steel wires, nonferrous metal wires and alloy wires or bars less than Φ6mm under low stress.
YG8Good wear resistance and strength, suitable for drawing steel, nonferrous metal and alloy bars less than Φ35mm.
YG15Suitable for drawing steel bars and tubes under very high stress.