Cold Heading Dies Pellets 2

Viên nén khuôn dập nguội

Cold Heading Dies Pellets, also called as carbide forging dies, are used for mold pellets in the field of chemistry, food, machinery, architecture, etc. Meetyou Carbide manufacture all kinds of tungsten carbide cold heading dies.

Cold heading is a manufacturing process that uses high-speed part formers to shape wire into intricate parts. These machines can produce 400 pieces per minute and can transform a simple piece of wire into a highly detailed part. The process involves putting a defined length of wire into a die that extrudes the wire into the desired shape.

The dies are heavier than punches and must be designed to withstand high loads. Cold headers typically use a radial extrusion die to increase the flow pattern of wire through the die. These dies generally require wire that is at least two times larger than the finished shank diameter. The wire is then extruded through the die until it reaches the diameter of the shank, which is upset to the dimensions of the head.

Another process used to manufacture cold headed parts is reverse extrusion. The metal is forced through the die using high pressure and a large screw. This method is more economical if large quantities of parts are manufactured. In addition, hydrostatic extrusion allows complex parts to be produced in one station. The process is also environmentally friendly, creating less scrap and resulting in a cleaner work environment.

A cold heading machine also requires a specific cutting method to cut off the coil. This method is different for each brand, but generally includes a cut-off knife that strikes the wire in a defined direction. In addition, some cold header machines have several parts that help in the process.

More than 800 kinds of sizes are available with accurate dimensions, coarse and fine grain size, and the polished surface can also be provided.

Thiêu kết
HÔNG.

Các lò HIP điều khiển bằng máy tính tiên tiến được áp dụng để cung cấp thêm áp lực trong quá trình thiêu kết để có được cấu trúc dày đặc hơn.

Bột
Thông minh.

Chúng tôi cẩn thận lựa chọn và kiểm soát chất lượng tuyệt vời của bột thô của chúng tôi. Công nghệ sấy phun bột đảm bảo tính đồng nhất của phân bố hạt.

Chế biến
Trong nhà.

Chúng tôi cung cấp cho khách hàng một loạt các dịch vụ xử lý tại chỗ bao gồm mài không tâm, mài trụ CNC, mài bên trong CNC, EDM dây và khắc laser, v.v.

 

OEM Dịch vụ khách hàng

Chúng tôi có thể phát triển các lớp theo yêu cầu của bạn và tạo hình dạng giống như bản vẽ của bạn. Đánh dấu laser và gói trung tính cũng có sẵn cho lợi ích của bạn.

Lớp

Biểu đồ lớp
Cấp
Tỉ trọng
TSR
Độ cứng
Kích thước hạt
KN15113.88003200≥86,52~3
KN5213.80003000≥863~6
KN20113.55003200≥83,83~6
KN20213.4003200.285,22~6
KN2113.38002700≥82,56~9
KN25113.1500 2600≥81,56~9
Ứng dụng

KN151 Thích hợp cho khuôn có khả năng chống mài mòn cao với đường kính nhỏ

KN52 Đường kính trong 2.1 trở xuống và đai ốc và bu lông cho thép không gỉ.

KN201 Thích hợp cho các khuôn để tạo ra một thanh thẳng, ốc vít, đai ốc, dây buộc cao, vv

KN202 Đường kính trong 2.1 trở lên và đai ốc và bu lông cho thép không gỉ.KN221 Dây buộc có độ va đập cao, đai ốc tạo hình

KN251 Thích hợp cho dây buộc tác động cao Tải trọng nặng khuôn nut